JAMNAGAR MACHINE TOOLS were established in the year 1976 with an aim of high ambitions and to manufacture products with high precision and high quality. At present more than 6000 machines are running successfully all over the India as well as abroad.
- CAPECITY & BED
- MAIN SPINDLE & TAIL STOKE
- THREADS & SPEED
- ELECTRICALS & DRIVE & GENERAL
- STANDARD ACCESSORIES
- EXTRA ACCESSORIES
- NOTE
CAPECITY
SPECIFICATION | MD-1 | MD-2 | MD-3 |
Height of Center | 215 mm (8.5") | 215 mm (8.5") | 215 mm (8.5") |
Swing Over Bed | 410 mm | 410 mm | 410 mm |
Swinging Gap | 610 mm | 610 mm | 610 mm |
Swing Over Cross Slide | 280 mm | 280 mm | 280 mm |
Admit Between Center | 520 mm | 740 mm | 960 mm |
Movement of Cross Slide | 200 mm | 200 mm | 200 mm |
Movement of Compound Slide | 120 mm | 120 mm | 120 mm |
BED
SPECIFICATION | MD-1 | MD-2 | MD-3 |
Bed Type | 2 V & 2 Flat | 2 V & 2 Flat | 2 V & 2 Flat |
Bed Length | 1375(4' 6") | 1600 (5' 3") | 1825 (6") |
Bed Width | 280 (11") | 280 (11") | 280 (11") |
Gap Lengh | 125 mm | 125 mm | 125 mm |
MAIN SPINDLE
SPECIFICATION | MD-1 | MD-2 | MD-3 |
Spindle Nose (Threaded Type) | Ø 74.3 mm | Ø 74.3 mm | Ø 74.3 mm |
Taper Bore in Spindle Sleeve | MT-4 | MT-4 | MT-4 |
Spindle Bore | Ø 54 (2 ¹/8") | Ø 54 (2 ¹/8") | Ø 54 (2 ¹/8") |
Bearing Front | 580 / 572 | 580 / 572 | 580 / 572 |
Bearing Rear | 32214 | 32214 | 32214 |
TAIL STOKE
SPECIFICATION | MD-1 | MD-2 | MD-3 |
Quill Dia. | Ø 50 mm | Ø 50 mm | Ø 50 mm |
Taper in Quill | MT-3 | MT-3 | MT-3 |
Quill Travel | 150 mm | 150 mm | 150 mm |
THREADS
SPECIFICATION | MD-1 | MD-2 | MD-3 |
Metric Thread | 13 (1 to 6 mm) | 13 (1 to 6 mm) | 13 (1 to 6 mm) |
English Thread | 19 (24 TPI) | 19 (24 TPI) | 19 (24 TPI) |
Lead Screw | Ø 1.25" X 4 TPI | Ø 1.25" X 4 TPI | Ø 1.25" X 4 TPI |
SPEED
SPECIFICATION | MD-1 | MD-2 | MD-3 |
No. of Spindle Speed | 8 | 8 | 8 |
RPM(Low/High) | 35 - 500 | 35 - 500 | 35 - 500 |
ELECTRICALS
SPECIFICATION | MD-1 | MD-2 | MD-3 |
Motor Power | 2 H.P./1.5 kw | 2 H.P./1.5 kw | 2 H.P./1.5 kw |
DRIVE
SPECIFICATION | MD-1 | MD-2 | MD-3 |
"V" Belt | B-48 | B-48 | B-48 |
GENERAL
SPECIFICATION | MD-1 | MD-2 | MD-3 |
Weight (Approx) | 650 kg. | 750 kg. | 825 kg. |
Floor Space Occupied (Approx) L x W x H |
1675 X 540 X 1160 mm | 180 X 540 X 1160 mm | 2125 X 540 X 1160 mm |
Change Gear Set (Inch & mm) | Chunk Plate | Tool Post Key | Center Adaptor |
Face Plate | Dead Center (2 Nos.) | Motor Pulley | Four Postition Tools Post |
Dog or True Chunk | Electric Motor & V-Belt with Eectricals | Taper Turning Attachment |
Steady Rest | Follow Rest | Norton Grar Box |
(1) As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.
(2) The descriptions of standard accessories confirms to it's list and not the photograph of the machine shown in the catalogue.